mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. the m616x series is ideally suited for a wide range of applications such as gps, military, avionics, test and measurement, wlan, wimax base stations, point to point/multi-point radios, medical equipment, frequency synthesis, frequency translation and land mobile radio. standard output for the m616x series is hcmos compatible or clipped sinewave. the product is ideally suited for battery and remote applications where it draws as little as 1.5 ma of current with a 3.3 volt supply at 13 mhz. this low power consumption provides an advantage over similarly specifed ovenized oscillators for power-sensitive applications. the m616x series offers 9.2 ppm minimum pull range with excellent tuning linearity performance for critical pll applications. this series is available in frequencies from 8 to 40mhz and selective frequencies up to 52 mhz. product features product description product applications product ordering information m616x series 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvcxo tight stability performance ? (+/0.2 ppm) over industrial temperatures (-40c to +85c) (+/0.10 ppm) over commercial temperatures (0c to 70c) available in 10 pad and 14 dip confgurations (contact factory for 14 dip) ? 3.0 v, 3.3 v and 5.0 v versions ? low phase noise performance ? tri-state function standard ? low g-sensitivity (0.6 ppb/g) version available ? ordering information product series m6160 : 5.0 v m6161 : 3.3 v m6162 : 3.0 v m6163 : 5.0 v low g m6164 : 3.3 v low g m6165 : 3.0 v low g temperature range 1: 0oc to +70oc 2: -40oc to +85oc 6: -20oc to +70oc 8: 0oc to +50oc f: -30oc to +75oc stability l: 4.6 ppm j: 1.0 ppm m: 0.2 ppm h: 2.5 ppm g: 0.5 ppm q: 0.14 ppm k: 2.0 ppm p: 0.3 ppm n: 0.10 ppm output type output waveform c: hcmos s : clipped sine wave package/lead confgurations frequency (customer specifed) m616x 1 j t c t 00.0000 mhz t : voltage controlled with tristate f : no voltage control with tristate n: 10 pad leadless ceramic d: 14 dip m6160sxxx, m6161sxxx, m6162sxxx, m6163sxxx, m6164sxxx & m6165sxxx - contact factory for datasheets. mtronptis m616x series tcxos and tcvcxos provide design engineers with low voltage, surface mount products with extremely tight stability (to 0.10 ppm) over temperature and time. specially processed crystals enable the m616x to achieve consistent long-term stability and minimal frequency shift after refow . this processing also achieves excellent g-sensitivity (0.6 ppb/g). the low phase noise (-155 dbc/hz at 100 khz) makes the m616x ideal for the design engineer working on all types of systems as the reference timing source. ten pad smt and 14-pin dip compatible versions available. revision: 5-7-11 n (10 pad) package option
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 2 mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. performance characteristics m616x series 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvcxo parameter symbol min. typ. max. units conditions/no tes frequency range f o 8 52 mhz contact factory above 40 mhz operating temperature t a -40 +85 c see ordering information storage temperature t stg -55 +125 c frequency tolerance @ +25c -1.0 +1.0 ppm for t cxo only frequency stability see ordering information (fmax C fmin)/2 stability vs. reflow -1.0 +1.0 ppm frequency vs. supply 0.02 0.1 ppm for 5% supply voltage variation frequency vs. load 0.02 0.1 ppm for 5% load var iation aging (first year) -1.0 +1.0 ppm f 0 < 20 mhz aging (first year) -2.0 +2.0 ppm f 0 > 20 mhz aging (10 year) -3.0 +3.0 ppm f 0 < 20 mhz (includes first year) aging (10 year) -5.0 +5.0 ppm f 0 > 20 mhz (includes first year) supply voltage tolerance -5.0 +5.0 % see ordering information supply current (i d ) 2.0 3.0 ma hcmos output at 13 mhz 3.0 4.0 ma hcmos output at 26 mhz 5.5 6.5 ma hcmos output at 52 mhz 1.3 1.9 ma clipped sinewave output at 13 mhz 1.7 2.3 ma clipped sinewave output at 26 mhz 2.8 3.5 ma clipped sinewave output at 52 mhz output logic levels v ol 20 %v s i oh /i ol = 4 ma, vs = +3.0 v (hcmos) v oh 80 %v s i oh /i ol = 4 ma, vs = +3.0 v output level 1.0 v pk-pk f o < 40 mhz (clipped sinewave) 0.8 v pk-pk f o > 40 mhz waveform symmetry 40 60 % ref. to ? v s. hcmos only rise/fall time 6.5 ns ref. 10% to 90%. hcmos on ly output load 15 pf hcmos output 10/10 kohm/pf clipped sinewave output frequency adjustment -5.0 +5.0 ppm over control voltage range g-sensitivity 0.6 ppb/g control voltage range 0.3 2.7 volts for v s = 3.0 0.3 3.0 volts for v s = 3.3 0.5 4.5 volts for v s = 5.0 input leakage current -50 +50 a input resistance 100 kohm linearity 5 % modulation bandwidth 2 khz tristate function 70 %v s output enabled. logic 1 or open 30 %v s output disabled. logic 0 or gnd tristate leakage current -100 +100 a phase noise -98 dbc/hz 10 hz offset (typical 20 mhz cmos) -125 dbc/hz 100 hz offset -145 dbc/hz 1 khz offset -154 dbc/hz 10 khz offset electrical specifications -156 dbc/hz 100 khz offset shock mil-std-202, method 213, condition c 100 g vibration mil-std-202, methods 201 & 204 10 g from 10 to 2000 hz solderability eiaj-std-002 package 5.0 x 7.0 mm, smt and dip rohs compliant environmental max soldering conditions see solder profile
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 3 phase noise plot m616x series 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvcxo output waveform (hcmos output) m616x 20 mhz phase noise
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 4 mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. product dimension & pinout information - package code n (10 pad) m616x series 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvcxo pin connections function pad n/c - do not connect 1 n/c - do not connect 2 n/c - do not connect 3 ground 4 output 5 n/c - do not connect 6 n/c - do not connect 7 tristate 8 supply voltage (v s ) 9 control voltage 10 suggested solder pad layout
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 5 handling information m616x series 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvcxo although protection circuitry has been designed into the m616x oscillator, proper precautions should be taken to avoid exposure to electrostatic discharge (esd) during handling and mounting. mtronpti utilizes a human-body model (hbm) and a charged-device model (cdm) for esd-susceptibility testing and protection design evaluation. esd voltage thresholds are dependent on the circuit parameters used to defne the mode. although no industry- wide standard has been adopted for the cdm, a standard hbm (resistance = 1500 ? , capacitance = 100 pf) is widely used and therefore can be used for comparison purposes. the hbm esd threshold presented here was obtained using these circuit parameters. typical test circuits test circuit - n package with tri-state n/c
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 6 maximum soldering conditions tape & reel specifcations (all measurements are in mm) a b c d e f g h j k l m n m616x 5.40 7.40 1.55 7.50 2.60 2.00 4.00 16.00 330 13.00 20.20 100 16.40 solder conditions note: exceeding these limits may damage the device. m616x series 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvcxo standard tape and reel: 1000 parts per reel
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 7 date revision pcn number details of revision for custom products or additional specifcations contact our sales team at 800.762.8800 (toll free) or 605.665.9321 for more information on this product visit the mtronpti website at www.mtronpti.com product revision table m616x series 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvcxo load circuit load circuit #2 - hcmos output load circuit #7 - clipped sinewave output quality parameters environmental specifications/qualification testing performed on the m616x tcxo/tcvcxo test test method test condition electrical characteristics internal specification p er specification frequency vs. temperature internal specification pe r specification mechanical shock mil-std-202, method 213, c 100 g, 6 ms vibration mil-std-202, method 201-204 10 g from 10- 2000 hz thermal cycle mil-std-883, method 1010, b -55 deg. c to +125 deg. c, 15 minute dwell, 10 cycles aging internal specification 168 hours at 105 degre es c gross leak mil-std-202, method 112 30 second immers ion (crystal only) fine leak mil-std-202, method 112 must meet 1x10 -8 (crystal only) solderability mil-std-883, method 2003 8 hour steam age C must exhibit 95% coverage resistance to solvents mil-std-883, method 2015 thr ee 1 minute soaks physical dimensions mil-std-883, method 2016 per sp ecification internal visual internal specification per internal specification note: c load includes probe and fxturing. c load dut output test point 10 pf dut output test point 10k ohms
|
